Tama Imperialstar 22' 6pcs -HLB

I spent a few weeks playing the Tama Imperialstar 22 6-piece in Hairline Blue and came away impressed by how much usable, musically honest drum you get in one box - especially for players who want a full kit with hardware and cymbals straight out of the case. My background is in gigging and home-recording, so I was listening for build consistency, tuning range, and how much work the kit needs before it can actually be used live or in a small studio.

First Impressions

The initial setup felt modern and well thought-out - the shells arrived with their 360-degree wrap glued cleanly, the hardware was rigid, and the included Meinl HCS cymbals let you set up and play immediately. I expected a lot of compromise from an all-in-one starter pack, but the Imperialstar looked and felt like a kit that had been designed with consistency in mind rather than thrown together to hit a low price point.

Design & Features

The Imperialstar 6-piece I played is built from 6-ply, 8 mm poplar shells and comes as a complete set - 22x16 bass drum, 10x7 and 12x8 rack toms, 14x13 and 16x15 floor toms, plus a 14x5 snare. TAMA supplies Stage Master-style hardware, an Omnisphere-style tom holder, triple-flange hoops, low-mass lugs, and factory heads - everything you need to mount and tune the kit. The kit ships with a 14 H/H, 16 crash and 20 ride Meinl HCS cymbal pack and a basic kick pedal and throne, so it truly is plug-and-play out of the box.

Build Quality & Protection

The poplar shells are light but solid, and the glued 360-degree wrap felt tight with no signs of lifting or sloppy seams on my sample. Lugs and hoops are basic but sturdy - they held tuning well through repeated changes and the triple-flange hoops made head swaps straightforward. I did inspect bearing edges closely and overall the precision edges are what give the drums a wider tuning range than you normally expect at this price.

Playability & Usability

Right away I could coax a wide range of tones with relatively simple tuning - lower for fat, open rock and higher for sharper funk/snare work. The poplar shells are naturally warm with a quicker decay, which I found forgiving for home practice and tight-enough for small club gigs when damped. The hardware package is comfortable and stable for most playing styles, though advanced players will likely swap the kick pedal and some cymbals over time.

Real-World Experience

I used this kit in rehearsals and a small, mic'd home session. With fresh heads the kit recorded nicely - the bass was present without overpowering, toms had a clear pitch and the snare cut through with a focused crack. Live, I found the kit comfortable for set lengths typical of bar or rehearsal contexts; it responds well to dynamics and feels like something you could realistically gig on after changing a few small components.

The Trade-Offs

The biggest compromises are the included cymbals and factory heads - the Meinl HCS pack is usable for practice but lacks the sustain and musicality I want for serious live mixes or recording, and you will almost certainly want to upgrade cymbals sooner rather than later. A minority of buyers have reported cosmetic issues on arrival on forum threads, so I would recommend inspecting bearing edges and shell surfaces during unpacking and being ready to exchange any imperfect pieces.

Final Verdict

The Imperialstar 22 6-piece is one of those rare beginner-to-intermediate kits that gives you an immediate, usable setup with hardware and cymbals included - and crucially, shells and hardware that stand up to real playing. If you are starting out, need a full kit fast, or want a solid platform to upgrade over time, this is a very sensible buy; if you are focused on high-end cymbals or pro-level recording, plan to budget for cymbals and a few hardware upgrades.