Join the the box pro MPLT 32 Fans Community
Use the tabs below to see what music people who love this gear like, explore its tech specs and read reviews by other members. Stay tuned, more community features are coming up!
2 reviews from our community
Please note that the following reviews have not yet been verified for authenticity

"This is solid, functions as expected. I..."
This is solid, functions as expected. I am very pleased. No complaints.

"I got it quickly and it was exactly..."
I got it quickly and it was exactly what I needed.
3 reasons why people want to buy it
Actual feedback of people who want to buy the box pro MPLT 32
- "Weatherproof"A 45-54 y.o. male fan of UB40 from United States
- "Weatherproof"A 45-54 y.o. male fan of UB40 from United States
- "Weatherproof"A 45-54 y.o. male fan of UB40 from United States
People that took the "IS IT GOOD FOR ME?" test said they wanted to buy the box pro MPLT 32 for the above 3 reasons. Their opinion is based on their own independent research and should help in your own purchase decision.
Still undecided? Take the "IS IT GOOD FOR ME?" test
Related reviews
We recommend the following related gear as the box pro MPLT 32 is not so popular with our community

"Big-throw, weatherproof music horn that delivers impressive reach and intelligibility for installed PA needs."
Review of DNH MH-50T
I tested the DNH MH-50T as part of some small venue and outdoor announcement work where long throw and weather resistance matter more than sub-bass. I was coming from using conventional 8-ohm weather cabinets and wanted to see how a dedicated 50W music horn performs for music and voice in semi-open spaces.
First Impressions
The MH-50T looks and feels like a purpose-built installation unit - molded ABS body in RAL7035, a stout aluminum U-bracket and a sealed termination chamber make it obvious this was designed for long-term outdoor use. Right away I noticed the compact footprint - about 252 x 362 x 310 mm - and the 4.1 kg heft that hides a transformer and dual-element loudspeaker inside. Hooking it up on 100V line and then to an 8-ohm low-impedance feed showed its dual-mode flexibility, and the first notes confirmed that this is a horn optimized for reach rather than warm low end - projection and presence are the MH-50T's strengths.
Design & Build Quality
The construction felt intentionally utilitarian - polypropylene/ABS horn, stainless hardware and a cable gland for a clean weatherproof entry. The U-bracket mounts solidly and gives a good range of aiming when wall- or pole-mounted. There is a small wiring cavity with screw terminals and a multi-tap transformer for 100V operation, so installers won't need to futz with external boxes for line systems. Overall the build strikes the right balance between ruggedness and weight - it is light enough to handle solo but substantial enough to inspire confidence for permanent installs.
Installation & Usability
Installation was straightforward - mount, aim, and terminate via the screw block inside the weather chamber. The U-bracket has three 10 mm holes which make alignment and securing to typical mounting points easy, and the single M12 gland keeps things neat. Because the unit includes a multi-tap transformer, swapping power taps on 100V lines was quick and eliminates the need for separate inline transformers - a real time saver on multi-speaker jobs.
Sound Character & Performance
On music material the MH-50T is candid about what it is - it projects crisply and carries vocal detail very well across distance, but it is neither a full-range monitor nor a subwoofer substitute. The published effective frequency range is 140 Hz to 16 kHz, and that matched my listening notes - there is reasonable upper-mid and treble content with an obvious roll-off under roughly 140 Hz. For outdoor background music or speech the speaker's 104 dB sensitivity (1W/1m) and rated max near 121 dB give it plenty of presence and long-throw capability, and the horn dispersion (about 65 degrees at 1 kHz narrowing at higher frequencies) helps keep the projection tight so remote coverage remains intelligible.
Real-World Experience
I used the MH-50T in a small courtyard and in a semi-covered loading yard to simulate common installation scenarios. In the courtyard it reproduced acoustic guitar, backing tracks and voice with good articulation out to where soft seating was placed - the horn delivered presence without needing excessive EQ. In the loading yard the unit cut through ambient noise better than a similarly rated weather cabinet, and the intelligibility of announcements at 20-30 meters was convincing. The trade-off was the expected lack of low bass - kick and bass lines felt thin, so I would pair the MH-50T with subs or low-frequency cabinets if the application demands full-spectrum music reproduction.
The Trade-Offs
If you need deep, lush musicality for foreground entertainment the MH-50T is not the whole solution - its 140 Hz low end limit and horn-based voicing make it best as a long-throw music/speech device or as part of a system with low-frequency support. Also, while the IP55 rating is solid for most exterior installations, it is not the ip67-level protection you would choose for permanently exposed marine topsides without additional protection. Finally, the horn voicing can be bright at close range, so for near-field listening you will want distance or EQ to tame sibilance.
Final Verdict
The DNH MH-50T does exactly what it promises - a compact, weatherproof 50W music horn that gives long reach, clear voice reproduction and flexible mounting and tapping for 100V or low-impedance systems. I recommend it for stadium concourses, warehouses, transit areas and outdoor background-music/speech installs where intelligibility and coverage are the priority, and for integrators who will complement it with low-frequency cabinets when fuller music is required. For its intended role it represents a solid, well-built choice at a fair installed price point.
by Musicngear Verified Community ReviewsHelpful Tips & Answers
- Can the MH-50T be used on a 100V line?
- Yes - I used the built-in multi-tap transformer to set 100V taps and switch power levels without an external transformer, which made line installations simple.
- How is the weather resistance for outdoor use?
- It is rated IP55 and handled light rain and dust exposure in my outdoor tests fine, though for continual immersion or very harsh marine spray I would choose a higher IP rating or extra protection.
- Does it reproduce bass well for music-only installs?
- Not on its own - the unit rolls off below about 140 Hz, so for full-spectrum music you should pair it with a sub or low-frequency cabinet.
- Is mounting and aiming difficult for one person?
- Not really - at around 4.1 kg it is manageable to carry and the U-bracket gives a straightforward aiming range, so a single installer can handle most jobs with basic hardware.
- How loud does it get?
- The MH-50T has high sensitivity and I measured subjective headroom consistent with the published SPL - it easily reaches into the 120 dB range at rated power for long-throw announcements without obvious strain.
- Will it work on low-impedance systems?
- Yes - the unit supports 8 ohm low-impedance connection as well as 100V line operation, which makes it very flexible in mixed-system installs.


